Cisco Catalyst 3560, Hardware Installation Manual

Page: 112 / 168

Appendix B Connector and Cable Specifications
Connector Specifications
B-4
Catalyst 3560 Switch Hardware Installation Guide
78-16057-01
Figure B-3 Copper SFP Module RJ-45 Connector
Console Port
The console port uses an 8-pin RJ-45 connector, which is described in Table B-1
and Table B-2 . The supplied RJ-45-to-DB-9 adapter cable is used to connect the
console port of the switch to a console PC. You need to provide a RJ-45-to-DB-25
female DTE adapter if you want to connect the switch console port to a terminal.
You can order a kit (part number ACS-DSBUASYN=) containing that adapter
from Cisco. For console port and adapter pinout information, see
Table B-1 and
Table B-2 .
60915
2 3 1 4 5 6 7 8 Pin Label
1
2
3
4
5
6
7
8
TP0+
TP0-
TP1+
TP2+
TP2-
TP1-
TP3+
TP3-