7-45
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Software Configuration Guide
OL-12247-04
Chapter 7 Configuring Switch-Based Authentication
Configuring the Switch for Secure Shell
To disable AAA, use the
no aaa new-model
global configuration command. To disable authorization,
use the
no aaa authorization
{
network
|
exec
}
method1
global configuration command.
Note
To secure the switch for HTTP access by using AAA methods, you must configure the switch with the
ip http authentication aaa
global configuration command. Configuring AAA authentication does not
secure the switch for HTTP access by using AAA methods.
For more information about the
ip http authentication
command, see the
Cisco IOS Security Command
Reference, Release 12.2
.
Configuring the Switch for Secure Shell
This section describes how to configure the Secure Shell (SSH) feature. To use this feature, you must
install the cryptographic (encrypted) software image on your switch. You can download the
cryptographic software image from
www.dell.com/support.
For more information, see the release notes
for this release.
These sections contain this information:
•
•
•
Displaying the SSH Configuration and Status, page 7-50
For SSH configuration examples, see the “SSH Configuration Examples” section in the “Configuring
Secure Shell” chapter of the
Cisco IOS Security Configuration Guide, Cisco IOS Release 12.2
, at
this URL:
http://www.cisco.com/en/US/products/sw/iosswrel/ps1835/products_configuration_guide_chapter0918
6a00800ca7d5.html
Note
For complete syntax and usage information for the commands used in this section, see the command
reference
for this release and the command reference for Cisco IOS Release 12.2 at this URL:
Step 7
end
Return to privileged EXEC mode.
Step 8
show running-config
Verify your entries.
Step 9
copy running-config startup-config
(Optional) Save your entries in the configuration file.
Command
Purpose
