5-27
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Software Configuration Guide
OL-12247-04
Chapter 5 Managing Switch Stacks
Displaying Switch Stack Information
Displaying Switch Stack Information
To display saved configuration changes after resetting a specific member or the stack, use these
privileged EXEC commands:
Troubleshooting Stacks
•
Manually Disabling a Stack Port, page 5-28
•
Re-Enabling a Stack Port While Another Member Starts, page 5-28
•
Understanding the show switch stack-ports summary Output, page 5-29
•
Identifying Loopback Problems, page 5-30
•
Finding a Disconnected Stack Cable, page 5-33
•
Fixing a Bad Connection Between Stack Ports, page 5-34
Table 5-4
Commands for Displaying Stack Information
Command
Description
show platform stack manager all
Display all stack information, such as the stack protocol
version.
show platform stack
ports
{
buffer |
history
}
Display the stack port events and history.
show switch
Display summary information about the stack, including the
status of provisioned switches and switches in
version-mismatch mode.
show switch
stack-member-number
Display information about a specific member.
show switch detail
Display detailed information about the stack ring.
show switch neighbors
Display the stack neighbors.
show switch stack-ports
[
summary
]
Display port information for the stack. Use the
summary
keyword to display the stack cable length, the stack link status,
and the loopback status.
show switch stack-ring activity
[
detail
]
Display the number of frames per member that are sent to the
stack ring. The
detail
keyword displays the number of frames
per member that are sent to the stack ring, the receive queues,
and the ASIC.
