manualshive.com logo in svg

Cisco Catalyst 3130, Software Configuration Manual, Page: 1252 / 1354

Share
Download
Cisco Catalyst 3130 Software Configuration Manual Download Page 1252

 

B-8

Cisco Catalyst Blade Switch 3130 and 3032 for Dell Software Configuration Guide

OL-12247-04

Appendix B      Working with the Cisco IOS File System, Configuration Files, and Software Images

Working with the Flash File System

This example shows how to create a file. This command writes the contents of the 

new-configs

 directory 

on the local flash device to a file named 

saved.

 on the TFTP server at 172.20.10.30:

Switch# 

archive /create tftp:172.20.10.30/saved. flash:/new-configs

This example shows how to display the contents of a switch file that is in flash memory:

Switch# 

archive /table flash:cbs31x0-universal-mz.122-40.EX1.

info (219 bytes)

cbs31x0-universal-mz.122-40.EX1/ (directory)

cbs31x0-universal-mz.122-40.EX1/html/ (directory)

cbs31x0-universal-mz.122-40.EX1/html/foo.html (0 bytes)

cbs31x0-universal-mz.122-40.EX1/cbs31x0-universal-mz.122-40.EX1.bin (610856 bytes)

cbs31x0-universal-mz.122-40.EX1/info (219 bytes)

This example shows how to display only the 

/html

 directory and its contents:

Switch# 

archive /table flash: cbs31x0-universal-mz.122-40/html

cbs31x0-universal-mz.122-40.EX1/html

cbs31x0-universal-mz.122-40.EX1/html/ (directory)

cbs31x0-universal-mz.122-40.EX1/html/const.htm (556 bytes)

cbs31x0-universal-mz.122-40.EX1/html/xhome.htm (9373 bytes)

cbs31x0-universal-mz.122-40.EX1/html/menu.css (1654 bytes)

<output truncated>

This example shows how to extract the contents of a file located on the TFTP server at 172.20.10.30.

Switch# 

archive /xtract tftp:/172.20.10.30/saved. flash:/new-configs

This example shows how to display the contents of a configuration file on a TFTP server:

Switch# 

more tftp://serverA/hampton/savedconfig

 

!

! Saved configuration on server

!

version 12.2

service timestamps log datetime localtime

Step 3

archive /xtract 

source-url 

flash:/

file-url 

[

dir/file

...]

Extract a file into a directory on the flash file system.

For 

source-url

, specify the source URL alias for the local file system. The 

-filename

.

 is the file from which to extract files. These options are supported:

•

local flash file system syntax:

flash:

•

FTP syntax:

ftp:

[[

//

username

[

:

password

]

@

location

]

/

directory

]

/

-filename

.

•

RCP syntax:

rcp:

[[

//

username

@

location

]

/

directory

]

/

-filename

.

•

TFTP syntax:

tftp:

[[

//

location

]

/

directory

]

/

-filename

.

For 

flash:/

file-url

 [

dir/file

...], specify the location on the local flash file system 

from which the file is extracted. Use the 

dir/file

... option to specify a list of files 

or directories within the file to be extracted. If none are specified, all files and 
directories are extracted.

Step 4

more

 [

/ascii

 | 

/binary

 | 

/ebcdic

] 

file-url

 

Display the contents of any readable file, including a file on a remote file 
system.

Command

Purpose

Summary of Contents for Catalyst 3130











































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments