Cisco Catalyst 2960 Series, Configuration Manual

Page: 817 / 2288

Purpose Command or Action
If you enter the no stack-mac persistent timer command after a new active
switchstack master takes over, before the time expires, the switch stack
moves to the current active switchstack master MAC address.
Note
Returns to privileged EXEC mode. end
Example:
Switch(config)# end
Step 4
(Optional) Saves your entries in the configuration file.
copy running-config
startup-config
Step 5
Example:
Switch# copy running-config
startup-config
What to Do Next
Use the
no stack-mac persistent timer
global configuration command to disable the persistent MAC address
feature.
Assigning a Stack Member Number
This optional task is available only from the active switchstack master.
Follow these steps to assign a member number to a stack member:
SUMMARY STEPS
1. enable
2.
configure terminal
3. switch current-stack-member-number renumber new-stack-member-number
4. end
5.
reload slot stack-member-number
6. show switch
7.
copy running-config startup-config
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
735
How to Configure a Switch Stack