Cisco Catalyst 2960 Series, Configuration Manual

Page: 653 / 2288

How to Configure QoS
Enabling QoS Globally
By default, QoS is disabled on the switch.
The following procedure to enable QoS globally is required.
SUMMARY STEPS
1.
configure terminal
2. mls qos
3.
end
4. show mls qos
5. copy running-config startup-config
DETAILED STEPS
Purpose Command or Action
Enters global configuration mode. configure terminal
Example:
Switch# configure terminal
Step 1
Enables QoS globally.
mls qos
Step 2
Example:
Switch(config)# mls qos
QoS operates with the default settings described in the related
topic sections below.
To disable QoS, use the
no mls qos
global
configuration command.
Note
Returns to privileged EXEC mode. end
Example:
Switch(config)#
end
Step 3
Verifies the QoS configuration. show mls qos
Example:
Switch# show mls qos
Step 4
(Optional) Saves your entries in the configuration file. copy running-config startup-config
Example:
Switch#
copy running-config
Step 5
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
571
How to Configure QoS