Cisco Catalyst 2960 Series, Configuration Manual

Page: 652 / 2288

DSCP Value IP Precedence Value
56 7
Related Topics
Default Mapping Table Configuration, on page 568
Configuring the IP-Precedence-to-DSCP Map, on page 606
Configuring the Policed-DSCP Map, on page 607
Default DSCP-to-CoS Map
You use the DSCP-to-CoS map to generate a CoS value, which is used to select one of the four egress queues.
The following table shows the default DSCP-to-CoS map. If these values are not appropriate for your network,
you need to modify them.
Table 72: Default DSCP-to-CoS Map
CoS Value DSCP Value
0 0 – 7
1 8 – 15
2 16 – 23
3 24 – 31
4 32 – 39
5 40 – 47
6 48 – 55
7 56 – 63
Related Topics
Default Mapping Table Configuration, on page 568
Configuring the DSCP-to-CoS Map, on page 608
Configuring the Policed-DSCP Map, on page 607
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
570
Information About QoS