Cisco Catalyst 2960 Series, Configuration Manual

Page: 651 / 2288

Table 70: Default CoS-to-DSCP Map
DSCP Value CoS Value
0 0
8 1
16 2
24 3
32 4
40 5
48 6
56 7
Related Topics
Default Mapping Table Configuration, on page 568
Configuring the CoS-to-DSCP Map, on page 604
Configuring the Policed-DSCP Map, on page 607
Default IP-Precedence-to-DSCP Map
You use the IP-precedence-to-DSCP map to map IP precedence values in incoming packets to a DSCP value
that QoS uses internally to represent the priority of the traffic. The following table shows the default
IP-precedence-to-DSCP map. If these values are not appropriate for your network, you need to modify them.
Table 71: Default IP-Precedence-to-DSCP Map
DSCP Value IP Precedence Value
0 0
8 1
16 2
24 3
32 4
40 5
48 6
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
569
Information About QoS