Cisco Catalyst 2960 Series, Configuration Manual

Page: 437 / 2288

Related Topics
Configuring LACP Fast Rate Timer: Examples, on page 361
Configuring Auto-LAG Globally
SUMMARY STEPS
1. enable
2. configure terminal
3. [
no
]
port-channel auto
4. end
5.
show etherchannel auto
DETAILED STEPS
Purpose Command or Action
Enables privileged EXEC mode. Enter your password if
prompted. enable
Example:
Switch> enable
Step 1
Enters the global configuration mode.
configure terminal
Example:
Switch# configure terminal
Step 2
Enables the auto-LAG feature on a switch globally. Use the no
form of this command to disable the auto-LAG feature on the
switch globally. [ no ] port-channel auto
Example:
Switch(config)# port-channel auto
Step 3
By default, the auto-LAG feature is enabled on the
port.
Note
Returns to privileged EXEC mode.
end
Example:
Switch(config)# end
Step 4
Displays that EtherChannel is created automatically.
show etherchannel auto
Example:
Switch# show etherchannel auto
Step 5
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
355
How to Configure EtherChannels