Cisco Catalyst 2960 Series, Configuration Manual

Page: 2096 / 2288

Result String
None
Set _cerrno
Yes
Sample Usage
The description statement is entered by the author of the policy. It can appear before or after any event
registration statement in Tcl. The policy can have only one description.
Registration of a policy with more than one description statement will fail. Note
The following example shows how a brief description is provided for the event_register_syslog policy:
::cisco::eem::description "This Tcl command looks for the word count in syslog messages."
::cisco::eem::event_register_syslog tag 1 ...
::cisco::eem::event_register_snmp_object tag 2 ...
::cisco::eem::trigger {
::cisco::eem::correlate event 1 and event 2
::cisco::eem::attribute tag 1 occurs 1
::cisco::eem::attribute tag 2 occurs 1
}
fts_get_stamp
Returns the time period elapsed since the last software boot. Use this Tcl command extension to return the
number of nanoseconds since boot in an array "nsec nnnn" where nnnn is the number of nanoseconds.
Syntax
fts_get_stamp
Arguments
None
Result String
nsec %d
Where nsec is the number of nanoseconds since boot.
Set _cerrno
No
register_counter
Registers a counter and returns a counter event ID. This Tcl command extension is used by a counter publisher
to perform this registration before using the event ID to manipulate the counter.
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
2014
fts_get_stamp