Cisco Catalyst 2960 Series, Configuration Manual

Page: 1863 / 2288

4 Fri Sep 9 13:50:00 2005 timer cron script: tm_cli_cmd.tcl
5 Fri Sep 9 13:51:00 2005 timer cron script: tm_cli_cmd.tcl
Step 6
show event manager history traps [ server | policy]
Use this command to display the EEM SNMP traps that have been sent either from the EEM server or from an EEM
policy.
Example:
Device# show event manager history traps
No. Time Trap Type Name
1 Fri Sep 9 13:48:40 2005 server applet: four
2 Fri Sep 9 13:57:03 2005 policy script: no_snmp_test.tcl
Displaying Software Modularity Process Reliability Metrics Using EEM
Perform this optional task to display reliability metrics for Cisco IOS Software Modularity processes. The
show event manager metric processes command is supported only in Software Modularity images.
SUMMARY STEPS
1. enable
2.
show event manager metric process { all | process-name }
DETAILED STEPS
Step 1 enable
Enables privileged EXEC mode. Enter your password if prompted.
Example:
Device>
enable
Step 2 show event manager metric process { all | process-name }
Use this command to display the reliability metric data for processes. The system keeps a record of when processes start
and end, and this data is used as the basis for reliability analysis. In this partial example, the first and last entries showing
the metric data for the processes on all the cards inserted in the system are displayed.
Example:
Device#
show event manager metric process all
=====================================
process name: devc-pty, instance: 1
sub_system id: 0, version: 00.00.0000
--------------------------------
last event type: process start
recent start time: Fri Oct10
20:34:40 2005
recent normal end time: n/a
recent abnormal end time: n/a
number of times started: 1
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
1781
How to Write Embedded Event Manager Policies Using Tcl