Cisco Catalyst 2960 Series, Configuration Manual

Page: 1853 / 2288

event_register_ipsla la
event_register_nf nf
event_register_none no
event_register_oir oi
event_register_process pr
event_register_rf rf
event_register_resource rs
event_register_routing rt
event_register_rpc rp
event_register_syslog sl
event_register_snmp sn
event_register_snmp_notification st
event_register_snmp_object so
event_register_timer tm
event_register_track tr
event_register_timer_subscriber ts
event_register_wdsysmon wd
How to Write Embedded Event Manager Policies Using Tcl
Registering and Defining an EEM Tcl Script
Perform this task to configure environment variables and register an EEM policy. EEM schedules and runs
policies on the basis of an event specification that is contained within the policy itself. When an EEM policy
is registered, the software examines the policy and registers it to be run when the specified event occurs.
Before You Begin
You must have a policy available that is written in the Tcl scripting language. Sample policies are provided--see
the details in the
Sample EEM Policies, on page 1782 to see which policies are available for the Cisco IOS
release image that you are using--and these sample policies are stored in the system policy directory.
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
1771
How to Write Embedded Event Manager Policies Using Tcl