integer
5 sysName.0
community
public
The following log message is written to the SNMP event manager log:
1d04h:%HA_EM-6-LOG: lset: 1.3.6.1.2.1.1.4.0
1d04h:%HA_EM-6-LOG: lset: XXX
The following example shows how to perform a set operation on a remote host.
Device(config)#
event manager applet snmp
Device(config-applet)#
event snmp oid
1.3.6.1.2.1.1.1.0
get-type exact entry-op
lt
entry-val
5120000
poll-interval
90
Device(config-applet)#
action 1.3 info type snmp oid
1.3.6.1.2.1.1.4.0
set-type integer
5 sysName.0
community
public
ipaddr
172.17.16.69
The following log message is written to the SNMP event manager log:
1d04h:%HA_EM-6-LOG: lset: 1.3.6.1.2.1.1.4.0
1d04h:%HA_EM-6-LOG: lset: XXX
Generating SNMP Notifications Examples
The following example shows how to configure SNMP traps for the sysUpTime.0 variable:
Device(config)#
event manager applet snmp
Device(config-applet)#
event snmp oid
1.3.6.1.4.1.9.9.48.1.1.1.6.1
get-type exact entry-op
lt
entry-val
5120000
poll-interval
90
Device(config-applet)#
action 1.3 info type snmp var
sysUpTime.0
oid
1.3.6.1.4.1.9.9.43.1.1.6.1.3.41
integer
2
Device(config-applet)#
action 1.4 info type snmp trap
enterprise-oid
ciscoSyslogMIB.2
generic-trapnum
6
specific-trapnum
1
trap-oid
1.3.6.1.4.1.9.9.41.2.0.1
trap-var
sysUpTime.0
The following output is generated if the debug snmp packets command is enabled:
Device#
debug snmp packets
1d04h: SNMP: Queuing packet to 172.69.16.2
1d04h: SNMP: V1 Trap, ent ciscoSyslogMIB.2, addr 172.19.rap 1
clogHistoryEntry.3 = 4
clogHistoryEntry.6 = 9999
1d04h: SNMP: Queuing packet to 172.19.208.130
1d04h: SNMP: V1 Trap, ent ciscoSyslogMIB.2, addr 172.19.rap 1
clogHistoryEntry.3 = 4
clogHistoryEntry.6 = 9999
1d04h: SNMP: Packet sent via UDP to 172.69.16.2
1d04h: SNMP: Packet sent via UDP to 172.69.16.2
infra-view10:
Packet Dump:
30 53 02 01 00 04 04 63 6f 6d 6d a4 48 06 09 2b
06 01 04 01 09 09 29 02 40 04 ac 13 d1 17 02 01
06 02 01 01 43 04 00 9b 82 5d 30 29 30 12 06 0d
2b 06 01 04 01 09 09 29 01 02 03 01 03 02 01 04
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
1753
Configuration Examples for Writing Embedded Event Manager Policies Using Tcl
Summary of Contents for Catalyst 2960 Series
