Cisco Catalyst 2960 Series, Configuration Manual

Page: 1778 / 2288

Description Environment Variable
The time period, in seconds and optional milliseconds,
used for measurement in subevents. _wd_sub1_period _wd_sub2_period
The process identifier of subevents. _wd_sub1_pid _wd_sub2_pid
The process name of subevents. _wd_sub1_procname _wd_sub2_procname
The CPU utilization of subevents measured as a
percentage.
_wd_sub1_value _wd_sub2_value
Watchdog System Monitor (WDSysMon)
mem_tot_avail and mem_tot_used Subevents
The memory available for subevents. _wd_sub1_avail _wd_sub2_avail
A percentage value of the difference that triggered
the event.
This variable is set only when the
_wd_sub1_is_percent or
_wd_sub2_is_percent
variable contains a
value of 1.
Note
_wd_sub1_diff _wd_sub2_diff
A number that identifies whether the value is a
percentage. A value of 0 means that the value is not
a percentage; a value of 1 means that the value is a
percentage.
_wd_sub1_is_percent _wd_sub2_is_percent
The slot number for the subevent RP reporting node. _wd_sub1_node _wd_sub2_node
The time period, in seconds and optional milliseconds,
used for measurement in subevents.
_wd_sub1_period _wd_sub2_period
The CPU utilization of subevents measured as a
percentage. _wd_sub1_value _wd_sub2_value
The memory used by subevents. _wd_sub1_used _wd_sub2_used
How to Write EEM Policies Using the Cisco IOS CLI
Registering and Defining an Embedded Event Manager Applet
Perform this task to register an applet with Embedded Event Manager and to define the EEM applet using the
Cisco IOS CLI
event and action commands. Only one event command is allowed in an EEM applet. Multiple
action commands are permitted. If no event and no action commands are specified, the applet is removed
when you exit configuration mode.
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
1696
How to Write EEM Policies Using the Cisco IOS CLI