Type escape sequence to abort.
Sending 5, 100-byte ICMP Echoes to 172.20.52.3, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/2/4 ms
Switch#
Table 153: Ping Output Display Characters
Description
Character
Each exclamation point means receipt of a reply.
!
Each period means the network server timed out while
waiting for a reply.
.
A destination unreachable error PDU was received.
U
A congestion experienced packet was received.
C
User interrupted test.
I
Unknown packet type.
?
Packet lifetime exceeded.
&
To end a ping session, enter the escape sequence (
Ctrl-^ X
by default). Simultaneously press and release the
Ctrl
,
Shift
, and
6
keys and then press the
X
key.
Related Topics
Ping, on page 1627
Executing Ping, on page 1643
Example: Performing a Traceroute to an IP Host
This example shows how to perform a
traceroute
to an IP host:
Switch#
traceroute ip 192.0.2.10
Type escape sequence to abort.
Tracing the route to 192.0.2.10
1 192.0.2.1 0 msec 0 msec 4 msec
2 192.0.2.203 12 msec 8 msec 0 msec
3 192.0.2.100 4 msec 0 msec 0 msec
4 192.0.2.10 0 msec 4 msec 0 msec
The display shows the hop count, the IP address of the router, and the round-trip time in milliseconds for each
of the three probes that are sent.
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
1653
Configuration Examples for Troubleshooting Software
Summary of Contents for Catalyst 2960 Series
