Cisco Catalyst 2960 Series, Configuration Manual

Page: 1632 / 2288

Purpose Command or Action
• (Optional) interval time — Specifies the time between
notifications; valid values are greater than or equal to 120
seconds. The default is 120 seconds.
Switch(config)# mac address-table
notification threshold limit 78
Returns to privileged EXEC mode.
end
Example:
Switch(config)# end
Step 7
Verifies your entries. show running-config
Example:
Switch# show running-config
Step 8
(Optional) Saves your entries in the configuration file.
copy running-config startup-config
Example:
Switch# copy running-config startup-config
Step 9
What to Do Next
Adding and Removing Static Address Entries
Follow these steps to add a static address:
SUMMARY STEPS
1. enable
2.
configure terminal
3. mac address-table static mac-addr vlan vlan-id interface interface-id
4.
end
5.
show running-config
6. copy running-config startup-config
DETAILED STEPS
Purpose Command or Action
Enables privileged EXEC mode. Enter your password if prompted. enable Step 1
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
1550
How to Administer the Switch