Cisco Catalyst 2960 Series, Configuration Manual

Page: 1628 / 2288

Purpose Command or Action
Verifies your entries. show running-config
Example:
Switch#
show running-config
Step 10
(Optional) Saves your entries in the configuration file. copy running-config startup-config
Example:
Switch# copy running-config startup-config
Step 11
Configuring MAC Address Move Notification Traps
When you configure MAC-move notification, an SNMP notification is generated and sent to the network
management system whenever a MAC address moves from one port to another within the same VLAN.
Follow these steps to configure the switch to send MAC address-move notification traps to an NMS host:
SUMMARY STEPS
1. enable
2. configure terminal
3.
snmp-server host host-addr
{
traps
|
informs
} {
version
{
1
|
2c
|
3
}} community-string notification-type
4. snmp-server enable traps mac-notification move
5.
mac address-table notification mac-move
6.
end
7. show running-config
8.
copy running-config startup-config
DETAILED STEPS
Purpose Command or Action
Enables privileged EXEC mode. Enter your password if prompted. enable
Step 1
Example:
Switch>
enable
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
1546
How to Administer the Switch