Cisco Catalyst 2960 Series, Configuration Manual

Page: 1489 / 2288

Related Topics
Flexible Authentication Ordering, on page 1347
Configuring Open1x
Beginning in privileged EXEC mode, follow these steps to enable manual control of the port authorization
state:
SUMMARY STEPS
1.
configure terminal
2.
interface interface-id
3. switchport mode access
4.
authentication control-direction { both | in }
5. authentication fallback name
6. authentication host-mode [ multi-auth | multi-domain | multi-host | single-host ]
7.
authentication open
8. authentication order [ dot1x | mab ] | { webauth }
9.
authentication periodic
10.
authentication port-control
{
auto
|
force-authorized
|
force-un authorized
}
11. end
DETAILED STEPS
Purpose Command or Action
Enters the global configuration mode. configure terminal
Example:
Switch# configure terminal
Step 1
Specifies the port to be configured, and enter interface
configuration mode. interface interface-id
Example:
Switch(config)#
interface gigabitethernet 1/0/1
Step 2
Sets the port to access mode only if you configured
the RADIUS server. switchport mode access
Example:
Switch(config-if)# switchport mode access
Step 3
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
1407
How to Configure 802.1x Port-Based Authentication