Cisco Catalyst 2960 Series, Configuration Manual

Page: 1101 / 2288

Purpose Command or Action
Creates an accounting method list and enables accounting.
The argument
list-name is a character string used to name
the created list.
aaa accounting { system | network | exec | connection |
commands level } { default | list-name } { start-stop |
stop-only | none } [ method1 [ method2... ]]
Example:
Device(config)# aaa accounting system default
start-stop
Step 3
Enters the line configuration mode for the lines to which
the accounting method list is applied. Do one of the following: Step 4
• line [ aux | console | tty | vty ] line-number
[ ending-line-number ]
or
Enters the interface configuration mode for the interfaces
to which the accounting method list is applied.
• interface interface-type interface-number
Example:
Device(config)# line aux line1
Applies the accounting method list to a line or set of lines. Do one of the following:
Step 5
or
• accounting { arap | commands level | connection |
exec } { default | list-name }
Applies the accounting method list to an interface or set
of interfaces.
• ppp accounting { default | list-name }
Example:
Device(config-line)# accounting arap default
(Optional) Exits line configuration mode and returns to
global configuration mode. Device(config-line)# end
Example:
Device(config-line)# end
Step 6
Configuring RADIUS System Accounting
Perform this task to configure RADIUS system accounting on the global RADIUS server:
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
1019
How to Configure Accounting