Cisco Catalyst 2960 Series, Configuration Manual

Page: 1100 / 2288

How to Configure Accounting
Configuring AAA Accounting Using Named Method Lists
To configure AAA Accounting using named method lists, perform the following steps:
System accounting does not use named method lists. For system accounting, define only the default method
list.
Note
SUMMARY STEPS
1.
enable
2.
configure terminal
3. aaa accounting { system | network | exec | connection | commands level } { default | list-name } { start-stop
| stop-only | none } [ method1 [ method2... ]]
4.
Do one of the following:
• line [ aux | console | tty | vty ] line-number [ ending-line-number ]
• interface interface-type interface-number
5.
Do one of the following:
• accounting { arap | commands level | connection | exec } { default | list-name }
• ppp accounting { default | list-name }
6. Device(config-line)# end
DETAILED STEPS
Purpose Command or Action
Enables privileged EXEC mode. enable Step 1
Example:
Device> enable
• Enter your password if prompted.
Enters global configuration mode. configure terminal
Example:
Device# configure terminal
Step 2
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
1018
How to Configure Accounting