Cisco Catalyst 2960 Series, Configuration Manual

Page: 1099 / 2288

Table 101: SNMP End-User Data Objects
The session identification used by the AAA
Accounting protocol (same value as reported by
RADIUS attribute 44 (Acct-Session-ID)). SessionId
The user login ID or zero-length string if a login is
unavailable. UserId
The IP address of the session or 0.0.0.0 if an IP
address is not applicable or unavailable. IpAddr
The elapsed time in seconds that the session has been
idle. IdleTime
The session termination object used to disconnect the
given client. Disconnect
The entry index corresponding to this accounting
session that the Call Tracker record stored. CallId
The table below describes the AAA summary information provided by the AAA session MIB feature using
SNMP on a per-system basis.
Table 102: SNMP AAA Session Summary
Number of sessions currently active. ActiveTableEntries
Maximum number of sessions present at once since
last system reinstallation. ActiveTableHighWaterMark
Total number of sessions since last system
reinstallation. TotalSessions
Total number of sessions that have been disconnected
using since last system reinstallation. DisconnectedSessions
Accounting Attribute-Value Pairs
The network access server monitors the accounting functions defined in either AV pairs or RADIUS
attributes, depending on which security method is implemented.
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
1017
Information About Configuring Accounting