Cisco Catalyst 2960 Series, Configuration Manual

Page: 1031 / 2288

Purpose Command or Action
Enables the least-outstanding load balancing for
a named server group. load-balance method least-outstanding [ batch-size
number ] [ ignore-preferred-server ]
Example:
Device(config-sg)# load-balance method least-outstanding
batch-size 30
Step 5
Exits server group configuration mode and enters
privileged EXEC mode.
end
Example:
Device(config-sg)# end
Step 6
Enabling Load Balancing for a Global RADIUS Server Group
The global RADIUS server group is referred to as
“
radius
”
in the authentication, authorization, and accounting
(AAA) method lists.
SUMMARY STEPS
1. enable
2.
configure terminal
3. radius-server host { hostname | ip-address } [ test username name ] [ auth-port number ]
[
ignore-auth-port
] [
acct-port number
] [
ignore-acct-port
] [
idle-time seconds
]
4. radius-server load-balance method least-outstanding [ batch-size number ]
[ ignore-preferred-server ]
5.
load-balance method least-outstanding [ batch-size number ] [ ignore-preferred-server ]
6.
end
DETAILED STEPS
Purpose Command or Action
Enables privileged EXEC mode.
enable
Step 1
Example:
Device> enable
• Enter your password if prompted.
Enters global configuration mode.
configure terminal
Example:
Device# configure terminal
Step 2
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
949
How to Configure RADIUS Server Load Balancing