19-6
Catalyst 2360 Switch Software Configuration Guide
OL-19808-01
Chapter 19 Configuring UDLD
Displaying UDLD Status
•
The
no udld
{
aggressive | enable
}
global configuration command followed by the
udld
{
aggressive | enable
} global configuration command re-enables the disabled ports.
•
The
no
udld port
interface configuration command followed by the
udld port
[
aggressive
]
interface configuration command re-enables the disabled fiber-optic port.
•
The
errdisable recovery
cause udld
global configuration command enables the timer to
automatically recover from the UDLD error-disabled state, and the
errdisable recovery
interval
interval
global configuration command specifies the time to recover from the UDLD error-disabled
state.
Displaying UDLD Status
To display the UDLD status for the specified port or for all ports, use the
show udld
[
interface-id
]
privileged EXEC command.
For detailed information about the fields in the command output, see the command reference for this
release.
