28
Advanced Settings
Cisco BWX360 WiMAX Outdoor Modem / engbt / Product number / Advanced_configuration.fm / 7.4.10
Sc
hablone 200
5
_07_27
Port Forwarding
The Cisco BWX360 WiMAX Outdoor Modem comes with the NAT (Network Address
Translation) function, which is always activated in Router operating mode. With
address mapping, multiple users in the local network can access the Internet via the
public IP address. All the local IP addresses are assigned to the router's public IP
address by default. All IP addresses of PCs in the local network are converted to the
router's public IP address when accessing the Internet.
Most Internet applications can be executed behind the NAT firewall without any prob-
lems. However, some applications - such as Internet games - require users in the Inter-
net to send requests to users in the local network so that the players can communicate
with each other. Sometimes these applications also require several ports to communi-
cate through. Such applications do not work if NAT is active.
Using port forwarding (the forwarding of requests to particular ports) the router is forced
to send requests from the Internet for a certain service, for example a game, to the
appropriate port(s) on the PC on which the game is running. If you configure Port For-
warding, the Cisco BWX360 WiMAX Outdoor Modem outwardly assumes the role of
the server. It receives requests from remote users under its public IP address and auto-
matically redirects them to local PCs. The private IP addresses of the servers on the
local network remain protected.
Internet services are addressed via defined port numbers. The Cisco BWX360 WiMAX
Outdoor Modem needs a mapping table of the port numbers to redirect the service
requests to the servers that actually provide the service. Port Forwarding has to be con-
figured for this purpose.
³
Open the
Advanced Settings
tab and on the
Internet
menu select
Port Forward-
ing
.
³
Define the list of services for which you want requests from the Internet to be for-
warded.
Important services are already included in the
Predefined applications
selection field.
The list can hold up to 20 entries.
The IP addresses of the PCs for which you set up port forwarding must
remain unchanged. If the IP addresses of the PCs are assigned via the
DHCP server of the Cisco BWX360 WiMAX Outdoor Modem, you must
select the option
Never expires
as the
Lease time
when configuring the
DHCP server or assign static IP addresses to the PCs, see "Configuring
the DHCP server" on page 30.
This function is not available in
Bridge
operating mode, see "Configuring
Summary of Contents for BWX360 WiMAX
Page 2: ......
