4-11
Cisco BTS 10200 Softswitch ISDN Provisioning and Troubleshooting
OL-12436-02
Chapter 4 Maintaining and Troubleshooting the ISDN System
Checking MGW Provisioning
Checking MGW Provisioning
This section describes how to check provisioning on IOS and IUA/SCTP gateways.
IOS Gateway
The following example shows how a Cisco IOS gateway is provisioned for ISDN backhauling using
RUDP.
Note
The typical problem areas are in
bold
type. Look at the problem area after the Call Agent is
provisioned.
Current configuration:
!
================
version 12.2
no service pad
service timestamps debug datetime msec
service timestamps log datetime localtime
no service password-encryption
!
hostname c2421.200
!
enable password xxxxxxx
!
clock timezone CDT -6
network-clock base-rate 56k
network-clock-select 3 T1 0
network-clock-select 1 T1 1
network-clock-select 2 system (SCB)
ip subnet-zero
!
!
ip domain-name ipclab.cisco.com
ip name-server 10.89.224.1
!
ip audit notify log
ip audit po max-events 100
backhaul-session-manager
set isdn1 client ft
group group1 set isdn1
group group2 set isdn1
session group group1 10.89.225.223 9000 10.89.227.200 9000 1
session group group1 10.89.226.223 9001 10.89.227.200 9001 2
session group group2 10.89.225.224 9000 10.89.227.200 9000 1
session group group2 10.89.226.224 9001 10.89.227.200 9001 2
isdn switch-type primary-ni
isdn voice-call-failure 0
!
!
!
!
!
!
!
no voice confirmation-tone
voice-card 0
!
