15-52
Cisco BTS 10200 Softswitch Troubleshooting Guide, Release 5.0.x
OL-8723-19
Chapter 15 Diagnostic Tests
System Health Report
System Health Report
The System Health Report (system-health) (SHR) allows the retrieval of the status of various processes
within the BTS 10200.
Use the following command example to run a SHR immediately:
CLI>
report system-health period=720;
The
SHR
command can be used in conjunction with the command scheduler. Using the command
scheduler, the SHR runs at periodic intervals collecting the last 24 hours (configurable) worth of data.
Upon initial installation and startup, there is an
SHR
command already scheduled to execute at midnight
every 24 hours.
To schedule multiple
SHR
command(s) at different times, the
command scheduler add
command can
be issued multiple times:
CLI>
add scheduled-command verb=report; noun=system-health; <recurrence=DAILY>;
<start-time=…>; <keys=period>; <values=…>
Use the following command to remove any scheduled
SHR
command(s):
CLI>
delete scheduled-command id=NNN
Use the following command to obtain an ID number and view the list of scheduled command(s):
CLI>
show scheduled-command verb=report; noun=system-health
To reschedule an
SHR
command for another time, change the recurrence, or change the collection
period, use the following command:
CLI>
change scheduled-command id=NNN; <recurrence=DAILY>; <start-time=…>; <keys=period>;
<values=…>
PERIOD
The amount of time to collect back to in hours. INTEGER: 1–720 (Default = 24).
