Cisco BTS 10200 Softswitch, Troubleshooting Manual

Page: 448 / 874

10-80
Cisco BTS 10200 Softswitch Troubleshooting Guide, Release 5.0.x
OL-8723-19
Chapter 10 Signaling Troubleshooting
Signaling Events and Alarms
SIGNALING (153)
To troubleshoot and correct the cause of the alarm, refer to the “Emergency Trunks Become Locally
Blocked—Signaling (153)” section on page 10-157 .
SIGNALING (154)
To troubleshoot and correct the cause of the alarm, refer to the “Emergency Trunks Become Remotely
Blocked—Signaling (154)” section on page 10-157 .
DESCRIPTION Emergency Trunks Become Locally Blocked
SEVERITY CRITICAL
THRESHOLD 100
THROTTLE 0
DATAWORDS CIC Number–STRING [40]
TGN-ID–FOUR_BYTES
DPC- STRING [20]
OPC- STRING [20]
MGW-EP-Name–STRING [64]
MGW-TSAP_ADDR–STRING [80]
Reason–STRING [80]
PRIMARY
CAUSE
Issued when an emergency trunk (CAS, SS7, or ISDN) gets locally blocked.
PRIMARY
ACTION
No action is required.
DESCRIPTION Emergency Trunks Become Remotely Blocked
SEVERITY CRITICAL
THRESHOLD 100
THROTTLE 0
DATAWORDS CIC Number–STRING [40]
TGN-ID–FOUR_BYTES
DPC- STRING [20]
OPC- STRING [20]
MGW-EP-Name–STRING [64]
MGW-TSAP_ADDR–STRING [80]
Reason–STRING [80]
PRIMARY
CAUSE
Issued when an emergency trunk (CAS, SS7, or ISDN) gets remotely blocked.
PRIMARY
ACTION
No action is required.