Cisco BTS 10200 Softswitch, Troubleshooting Manual

Page: 412 / 874

10-44
Cisco BTS 10200 Softswitch Troubleshooting Guide, Release 5.0.x
OL-8723-19
Chapter 10 Signaling Troubleshooting
Signaling Events and Alarms
SIGNALING (81)
To troubleshoot and correct the cause of the alarm, refer to the “Insufficient Heap Memory—Signaling
(81)” section on page 10-140 .
Note
Refer to the “Obtaining Documentation and Submitting a Service Request” section on page lvi for
detailed instructions on contacting Cisco TAC and opening a service request.
SIGNALING (82)
To troubleshoot and correct the cause of the alarm, refer to the “Insufficient Shared Memory
Pools—Signaling (82)” section on page 10-140 .
Note
Refer to the “Obtaining Documentation and Submitting a Service Request” section on page lvi for
detailed instructions on contacting Cisco TAC and opening a service request.
DESCRIPTION Insufficient Heap Memory
SEVERITY CRITICAL
THRESHOLD 100
THROTTLE 0
DATAWORDS Gateway ID–STRING [32]
PRIMARY
CAUSE
Issued when the H.323 Protocol (H323) signaling adapter is unable to allocate memory from the
system.
PRIMARY
ACTION
Call Cisco TAC for assistance. (Contact Cisco TAC.)
DESCRIPTION Insufficient Shared Memory Pools
SEVERITY CRITICAL
THRESHOLD 100
THROTTLE 0
DATAWORDS Gateway ID–STRING [32]
PRIMARY
CAUSE
Issued when the H323 signaling adapter was unable to allocate storage.
PRIMARY
ACTION
Call Cisco TAC for corrective action. (Contact Cisco TAC.)