Cisco BTS 10200 Softswitch, Troubleshooting Manual

Page: 297 / 874

7-65
Cisco BTS 10200 Softswitch Troubleshooting Guide, Release 5.0.x
OL-8723-19
Chapter 7 Maintenance Troubleshooting
Maintenance Events and Alarms
MAINTENANCE (122)
For additional information, refer to the “Northbound Provisioning Message is
Retransmitted—Maintenance (122)” section on page 89 .
MAINTENANCE (123)
To monitor and correct the cause of the event, refer to the “Northbound Provisioning Message Dropped
Due To Full Index Table—Maintenance (123)” section on page 89 .
DESCRIPTION Northbound Provisioning Message is Retransmitted
SEVERITY INFO
THRESHOLD 100
THROTTLE 0
DATAWORDS Prov Time at Seconds–FOUR_BYTES
Prov Time at Milli Seconds–FOUR_BYTES
Table Name–STRING [40]
Update String–STRING [256]
PRIMARY
CAUSE
The EMS hub maybe responding slowly.
PRIMARY
ACTION
Check to see if there are any hub alarms. Take the appropriate action according to the alarms.
DESCRIPTION Northbound Provisioning Message Dropped Due To Full Index Table (Northbound Provisioning
Message Dropped Due To Full IDX Table)
SEVERITY WARNING
THRESHOLD 100
THROTTLE 0
DATAWORDS Prov Time at Seconds–FOUR_BYTES
Prov Time at Milli Seconds–FOUR_BYTES
Table Name–STRING [40]
Update String–STRING [256]
PRIMARY
CAUSE
The EMS hub is not responding.
PRIMARY
ACTION
Verify if there are any alarms originating from the hub and take the appropriate action.