Cisco BTS 10200 Softswitch, Troubleshooting Manual

Page: 242 / 874

7-10
Cisco BTS 10200 Softswitch Troubleshooting Guide, Release 5.0.x
OL-8723-19
Chapter 7 Maintenance Troubleshooting
Maintenance Events and Alarms
MAINTENANCE (10)
To troubleshoot and correct the cause of the alarm, refer to the “Local Initialization
Timeout—Maintenance (10)” section on page 7-97 .
MAINTENANCE (11)
For additional information, refer to the “Switchover Complete—Maintenance (11)” section on
page 7-71 .
DESCRIPTION Keep Alive Module: Local Initialization Timeout (KAM: Local Initialization Timeout)
SEVERITY MAJOR
THRESHOLD 100
THROTTLE 0
DATAWORDS Local State–STRING [30]
Mate State–STRING [30]
PRIMARY
CAUSE
The local initialization has timed out.
PRIMARY
ACTION
Check that the binary files are present for the unit (Call Agent, Feature Server, or Element Manager).
SECONDARY
CAUSE
When the event report is issued, the system has failed and the re-initialization process has failed.
SECONDARY
ACTION
If the files are not present, then re-install the files from the initial or backup media. Then restart the
failed device.
DESCRIPTION Switchover Complete
SEVERITY INFO
THRESHOLD 100
THROTTLE 0
DATAWORDS Local State–STRING [30]
Mate State–STRING [30]
PRIMARY
CAUSE
Acknowledges that the changeover has successfully completed.
PRIMARY
ACTION
This is an informational event report and no further action is required.