Verify the Hardware Configuration
To display and verify the hardware features, enter the following commands:
Table 6: Hardware Commands
Description
Command
Displays the following information:
• system hardware version
• software version installed
• configuration file names and source
• boot image
• DRAM space
• NVRAM space
• flash memory space
show version
Displays IDPROM information for the assemblies in
the device.
show diag slot
Check Hardware and Software Compatibility
To check the minimum software requirements of Cisco IOS-XE software with the hardware installed on your
Cisco ASR 920 Router, Cisco maintains the
Software Research
tool on Cisco.com. The tool provides the
minimum Cisco IOS-XE requirements for individual hardware modules and components.
To access this tool, you must have a Cisco.com login account.
Note
To access the
Software Research
tool:
1.
Go to
http://software.cisco.com/selection/research.html
.
2.
In the
Search by Product
tab, type
ASR 920
.
3.
The Cisco Suggested Release versions are displayed.
Configure Device at Startup
This section explains how to create a basic running configuration for your device.
Acquire the correct network addresses from your system administrator or consult your network plan before
you create the basic running configuration.
Note
Cisco ASR-920-20SZ-M Aggregation Services Router Hardware Installation Guide
54
Configure the Device
Verify the Hardware Configuration
