Cisco ASR 914 Manual Download Page 36 | Manualshive

Page: 36 / 82

Cisco ASR 914 Manual Download Page 36

Step 3

Follow the instructions on your screen to complete the installation.

Step 4

Connect the USB cable to the PC and router USB console ports. The EN LED for the USB console port turns
green, and within a few moments a pop up window stating “Installing device driver software” appears.
Following the instructions to complete the installation of the driver.

The USB console is ready for use.

Uninstalling the Cisco Microsoft Windows USB Driver

This section provides instructions for how to uninstall the Cisco Microsoft Windows USB device driver.

Uninstalling the Cisco Microsoft Windows XP and 2000 USB Driver

This procedure shows you how to uninstall both the Microsoft Windows XP and 2000 USB driver. The driver
can be removed using the Windows Add Remove Programs utility or the setup.exe program.

Using the Add Remove Programs Utility

Disconnect the router console terminal before uninstalling the driver.

Note

Procedure

Step 1

Click

Start > Control Panel > Add or Remove Programs

.

Step 2

Scroll to Cisco Virtual Com and click

Remove

.

Step 3

When the Program Maintenance window appears, select the

Remove

radio button. Click

Next

.

Uninstalling the Cisco Microsoft Windows Vista USB Driver

This procedure shows you how to uninstall the Microsoft Windows Vista USB driver.

Disconnect the router console terminal before uninstalling the driver.

Note

Procedure

Step 1

Run the setup.exe for Windows 32-bit or setup(x64).exe for Windows-64bit. Click

Next

.

Step 2

The InstallShield Wizard for Cisco Virtual Com appears. Click

Next

.

Step 3

When the Program Maintenance window appears, select the Remove radio button. Click

Next

.

Step 4

When the Remove the Program window appears, click

Remove

.

If a User Account Control warning appears, click “Allow - I trust this program...” to proceed.

Note

Installing the Cisco ASR 914 Router

36

Installing the Cisco ASR 914 Router

Uninstalling the Cisco Microsoft Windows USB Driver

«
...
34
35
36
37
38
...
»

Summary of Contents for ASR 914



















































































Reviews:

No comments