![background image](http://html.mh-extra.com/html/cisco/asr-9000-series/asr-9000-series_command-reference-manual_64844639.webp)
show bundle
To display information about all bundles or a specific bundle of a particular type, use the
show bundle
command in EXEC configuration mode.
show bundle
[
Bundle-EtherBundle-POS bundle-id
]
Syntax Description
Displays information for the specified Ethernet bundle.
Bundle-Ether
Displays information for the specified POS bundle.
Bundle-POS
Number from 1 to 65535 that identifies a particular bundle.
bundle-id
Command Default
Information is displayed for all configured bundles.
Command Modes
EXEC mode
Command History
Modification
Release
This command was introduced.
Release 3.7.2
The
reasons
keyword was removed.
Release 3.8.0
The output for this command was replaced with a new format.
Release 4.0.0
The following output fields were added:
•
Load-balancing
•
Link order signaling
•
Hash type
•
Cisco extensions
Release 4.1.0
Support for Bundle-POS was added.
Release 4.2.0
The "Non-revertive" output field was added.
Release 5.3.2
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
619
Link Bundling Commands on the Cisco ASR 9000 Series Router
show bundle