![background image](http://html.mh-extra.com/html/cisco/asr-9000-series/asr-9000-series_command-reference-manual_64844524.webp)
mlacp reset priority
To reset operational priorities of mlacp members to their configured mLACP prorities, use the
mlacp reset
priority
command in EXEC mode.
mlacp reset priority bundle-ether interface-path-id
Syntax Description
Specifies a physical interface instance or a virtual interface
instance.
bundle-ether interface-path-id
Command Default
No default behavior or values.
Command Modes
EXEC
Command History
Modification
Release
This command was introduced.
Release 4.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes the proper task
IDs. If you suspect user group assignment is preventing you from using a command, contact your AAA
administrator.
This command is for aggregated ethernet interfaces only. The command cannot be used if brute-force switchover
is employed.
Task ID
Operation
Task ID
execute
bundle
Examples
The following example shows how to use the
mlacp reset priority
command:
RP/0/RSP0/CPU0:router #
mlacp reset priority bundle-ether 10
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
504
Global Interface Commandsonthe Cisco ASR 9000 Series Router
mlacp reset priority