Cisco ASR 9000 Serie Configuration Manuals Download Page 171

Page: 171 / 378

Syntax

Arguments

(Optional) Action_syslog message facility level. If
this argument is not specified, the default priority is
LOG_INFO.

priority

(Optional) Message to be logged.

msg

Result String

None

Set _cerrno

Yes

(_cerr_sub_err = 14)

FH_ENOSUCHACTION

(unknown action type)

This error means that the action command requested was unknown.

action_track_read

Reads the state of a tracked object when an Embedded Event Manager (EEM) script is triggered.

Syntax

action_track_read ?

Arguments

(Mandatory) Tracked object name.

? (represents a string)

Result String

name {%s}
state {%s}

Set _cerrno

Yes

FH_ENOTRACK

This error means that the tracked object name was not found.

Cisco ASR 9000 Series Aggregation Services Router System Monitoring Configuration Guide, Release 4.2.x

155

Configuring and Managing Embedded Event Manager Policies

Embedded Event Manager Action Tcl Command Extensions

Summary of Contents for ASR 9000 Serie



























































































































































































































































































































































































Search results

Summary of Contents for ASR 9000 Serie

Reviews:

Brands by name

Popular brands

Cisco ASR 9000 Serie, Configuration Manuals

Search results

Summary of Contents for ASR 9000 Serie

Reviews:

Brands by name

Popular brands