manualshive.com logo in svg

Cisco ASR 14000 Series, Management Command Reference

Share
Download
Cisco ASR 14000 Series Management Command Reference Download Page 485

C i s c o   C o n f i d e n t i a l   -   B e t a   R e v i e w   R 3 . 7. 1

Object Tracking Commands in Cisco IOS XR Software

type line-protocol state

SMR-483

Cisco ASR 14000 Series Router System Management Command Reference

OL-17231-01

type line-protocol state

To configure tracking of the line protocol state of an interface object, use the 

type line-protocol 

command in track configuration mode. To delete the configuration of line-protocol tracking, use the 

no

 

form of this command.

type

 

line-protocol state

no

 

type

 

line-protocol state

 

Defaults

No default behavior or values

Command Modes

Track configuration

Command History

Usage Guidelines

To use this command, you must be in a user group associated with a task group that includes the proper 
task IDs.  

The 

type line-protocol state

 command can be used in conjunction with the 

delay 

command to configure 

the delay, in seconds, before the track or interface state should be polled for a change in its status.

The

 type line-protocol state

 command enters line-protocol tracking configuration mode.

Task ID

Examples

The following example shows how to use the 

type line-protocol state 

command:

RP/0/RP0/CPU0:router# 

configure

RP/0/RP0/CPU0:router(config)# 

track

 

track12

RP/0/RP0/CPU0:router(config-track)# 

type line-protocol state

Related Commands

Release

Modification

Release 3.7.1

This command was introduced on the Cisco ASR 14000 Series Router. 

Task ID

Operations

sysmgr

read, write

Command

Description

clear type 
line-protocol state

Clears entry of the line protocol state as the basis for tracking.

delay

Configures the duration, in seconds, before the track or interface state 
should be polled for a change in status.

interface (track)

Indicates an interface object type for tracking purposes.

Summary of Contents for ASR 14000 Series















































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands