Configuration Management Commands on Cisco IOS XR Software
exit
SMR-127
Cisco ASR 14000 Series Router System Management Command Reference
OL-17231-01
exit
To close an active terminal session and log off the router, use the
exit
command in EXEC or
administration EXEC mode.
To return the router to the next higher configuration mode, use the
exit
command in any configuration
mode.
exit
Syntax Description
This command has no arguments or keywords.
Defaults
No default behavior or values
Command Modes
EXEC
Any configuration
Command History
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes the proper
task IDs.
Use the
exit
command to exit any configuration mode from the current configuration mode to the next
higher command mode.
To log off from a terminal session, enter the
exit
command in EXEC or administration EXEC mode.
When exiting from global or administration configuration mode to EXEC or administration EXEC mode,
you are prompted to commit any uncommitted configuration changes.
Uncommitted changes found, commit them before exiting(yes/no/cancel)?[cancel]:
•
Entering
yes
saves configuration changes to the running configuration file, exits the configuration
session, and returns the router to EXEC or administration EXEC mode.
If errors are found in the running configuration, the configuration session does not end. To view the
errors, enter the
command with the
failed
keyword.
•
Entering
no
exits the configuration session and returns the router to EXEC or administration EXEC
mode without committing the configuration changes.
•
Entering
cancel
leaves the router in the current configuration session without exiting or committing
the configuration changes.
Note
Entering the
exit
command from global configuration is functionally equivalent to entering the
end
command.
Release
Modification
Release 3.7.1
This command was introduced on the Cisco ASR 14000 Series Router.
