Cisco ASR 1001, Hardware Installation Manual

Page: 668 / 702

Description Direction Signal Pin
Data Set Ready/Data
Carrier Detect Input DSR/DCD 7
Clear to Send Input CTS 8
Cisco ASR 1013 Router BITS Port Signals and Pinouts
The following table lists the pinouts of the front panel Building Integrated Timing Supply (BITS) RJ45 port.
Table 123: BITS RJ-45 Interface Pinouts for Cisco ASR 1013 Router
Description Direction Signal Pin
Receive Ring Input RX Ring 1
Receive TIP (T1/E1) Input RX TIP 2
— — N/C 3, 4
— Unused TX Ring 5
— Unused TX TIP 6
— — N/C 7,8
Cisco ASR 1013 Router DB-25 Pinout Assignments for Alarm Relays
The following table lists the common, normally open, and normally closed relay contacts accessible to an
external alarm monitoring facility by means of the DB-25 connector.
For more information about the DB-25 alarm connector, see xref
c_Cisco_ASR_1006_Router_DB-25_Pinout_Assignments_for_Alarm_Relays_1018881.xml.
Table 124: Cisco ASR 1013 Router DB-25 Alarm Connector Pinout Assignments
SPARE Normally Closed
(NC) Normally Open
(NO) Common
(CM) Description Signal
— 14 1 2 Critical Audible
Alarm CRTAA
— 15 3 16 Major Audible
Alarm MAJAA
Cisco ASR 1000 Series Router Hardware Installation Guide
634
Cisco ASR 1000 Series Router Specifications
Cisco ASR 1013 Router BITS Port Signals and Pinouts