Cisco ASR 1001, Hardware Installation Manual

Page: 428 / 702

Cisco ASR 1013 Router Power Supply Overview
This section provides information about the Cisco ASR 1013 power supply input requirements and power
cable options.
The DC power supply for the Cisco ASR 1013, ASR 1006, ASR 1004, and ASR 1002 routers operate at
individual specifications. The following table shows the common input ranges and circuit breaker requirements.
Table 80: Cisco ASR 1000 Series Router DC Power Supply System Input Requirements
AWG # Wire Circuit Breaker
Amps System Input
Rating (Amps) Cisco ASR 1000
Series Router
DC Power
Supply
Maximum Minimum Maximum Minimum
Always AWG
#6 wire Always 50 40 Cisco ASR 1006
8 10 40 30 24 Cisco ASR 1004
10 12 30 20 16 Cisco ASR 1002
Always AWG
#6 wire Always 50 40 Cisco ASR 1013
For example, the
Cisco ASR 1002
Router DC
power supply,
with 16 Amp
input rating
must use an
AWG #12 gauge
wire for a 20 A
circuit breaker
and an AWG
#10 gauge wire
for a 30 A
circuit breaker.
Power Cords Supported by the Cisco ASR 1013 Router
The following power cords are supported by the Cisco ASR 1013 Router:
• CAB-AC20A-90L-IN — 20 A AC right-angle power cord — International
• CAB-4000W-US1 — Power Cord, 250 VAC 20 A, Right Angle C19, NEMA 6-20 Plug, US
Cisco ASR 1000 Series Router Hardware Installation Guide
394
Cisco ASR 1013 Router Overview and Installation
Cisco ASR 1013 Router Power Supply Overview