Cisco ASR 1001-X Hardware Installation Manual Download Page 6

Page: 6 / 152

Compatible ROMMON Releases

Resolved Caveats

Hardware the Require a CPLD Upgrade

Upgrading the CPLD

Checking Hardware and Software Compatibility

Using Cisco Feature Navigator

C H A P T E R 6

Cisco ASR 1001-X Router License Verification

Viewing the Cisco IOS License Level

Configuring the Throughput Level

Viewing License Information

Per Port Counted License (10-GE Interfaces)

10-GE Interface Evaluation License Features

C H A P T E R 7

Removing and Replacing FRUs from the Cisco ASR 1001-X Router

Removing and Replacing the Cisco ASR 1001-X Router Power Supplies

Removing AC Power Supplies from the Cisco ASR 1001-X Router

Installing AC Power Supplies in the Cisco ASR 1001-X Router

Removing DC Input Power from the Cisco ASR 1001-X Router

Installing DC Input Power on the Cisco ASR 1001-X Router

Wiring the DC Input Power Source

Removing and Replacing Cisco ASR 1001-X Router USB Flash Memory Stick or Secure

Token

101

Removing and Replacing the Cisco ASR 1001-X Router DIMM

102

Removing and Replacing the Cisco ASR 1001-X Router DIMM Memory Module

102

Removing a Cisco ASR 1001-X Router DIMM

103

Replacing a Cisco ASR 1001-X Router DIMM

105

Removing and Replacing a Cisco ASR 1001-X Router SPA

108

Electrostatic Discharge Prevention

108

Removing a Shared Port Adapter

109

Replacing a Shared Port Adapter

110

Removing and Replacing a NIM on the Cisco ASR 1001-X Router

Removing and Replacing an SSD from the NIM-SSD Module

113

Cisco ASR 1001-X Router Hardware Installation Guide

Contents

Summary of Contents for ASR 1001-X
























































































































































Search results

Summary of Contents for ASR 1001-X

Reviews:

Cisco ASR 1001-X, Hardware Installation Manual, Page: 6 / 152

Search results

Summary of Contents for ASR 1001-X

Reviews: