manualshive.com logo in svg

Cisco ASR 1001-X, Hardware Installation Manual, Page: 45 / 152

Share
Download
Cisco ASR 1001-X Hardware Installation Manual Download Page 45

ICES-003 Class A

EN55022/CISPR 22 Information Technology
Equipment (Emissions)

EN55024/CISPR 24 Information Technology
Equipment (Immunity)

EN300 386 Telecommunications Network Equipment
(EMC)

EN50082-1/EN61000-6-1 Generic Immunity Standard

UL60950-1

Safety Standards

CSA C22.2 No. 60950-1-03

EN 60950-1

IEC 60950-1

AS/NZS 60950.1

Radio Frequency Interference

When electromagnetic fields act over a long distance, radio frequency interference (RFI) can be propagated.
Building wiring can often act as an antenna, receiving the RFI signals and creating more EMI on the wiring.

If you use twisted-pair cable in your plant wiring with a good distribution of grounding conductors, the plant
wiring is unlikely to emit radio interference. If you exceed the recommended distances, use a high-quality
twisted-pair cable with one ground conductor for each data signal.

Lightning and AC Power Fault Interference

If signal wires exceed recommended cabling distances, or if signal wires pass between buildings, you should
consider the effect that a lightning strike in your vicinity might have on the Cisco ASR 1001-X Router.

The electromagnetic pulse (EMP) generated by lightning or other high-energy phenomena can couple enough
energy into unshielded conductors to damage or destroy electronic equipment. If you have previously
experienced such problems, you should consult with RFI/EMI experts to ensure that you have adequate
electrical surge suppression and shielding of signal cables in your Cisco ASR 1001-X Router operating
environment.

Rack-Mounting Guidelines

This section describes guidelines on rack-mounting.

Cisco ASR 1001-X Router Hardware Installation Guide    

37

Preparing Your Site for Installation

Rack-Mounting Guidelines

Summary of Contents for ASR 1001-X

























































































































































Reviews:

No comments