manualshive.com logo in svg

Cisco ASR 1001-X, Hardware Installation Manual, Page: 37 / 152

Share
Download
Cisco ASR 1001-X Hardware Installation Manual Download Page 37

This product relies on the building

’

s installation for short-circuit (overcurrent) protection. Ensure that the

protective device is rated not greater than: AC power supply for the Cisco ASR 1001-X Router: 120 VAC,
30A U.S. maximum. DC power supply for the Cisco ASR 1001-X Router: 30A U.S. maximum. Statement
1005

Danger

This product requires short-circuit (overcurrent) protection to be provided as part of the building installation.
Install only in accordance with national and local wiring regulations. Statement 1045

Danger

This unit may have more than one power supply connection. All connections must be removed to
de-energize the unit. Statement 1028

Danger

This unit is intended for installation in restricted access areas. A restricted access area can be accessed
only through the use of a special tool, lock and key, or other means of security. Statement 1017

Danger

The plug-socket combination must be accessible at all times, because it serves as the main disconnecting
device. Statement 1019

Danger

Hazardous voltage or energy may be present on the DC power terminals. Always replace cover when
terminals are not in service. Be sure uninsulated conductors are not accessible when cover is in place.
Statement 1075

Danger

Use copper conductors only. Statement 1025

Danger

This equipment must be grounded. Never defeat the ground conductor or operate the equipment in the
absence of a suitably installed ground conductor. Contact the appropriate electrical inspection authority
or an electrician if you are uncertain that suitable grounding is available. Statement 1024

Danger

Hazardous voltage or energy is present on the backplane when the system is operating. Use caution when
servicing. Statement 1034

Danger

Class 1 laser product. Statement 1008

Danger

Cisco ASR 1001-X Router Hardware Installation Guide    

29

Preparing Your Site for Installation

General Safety Warnings

Summary of Contents for ASR 1001-X

























































































































































Reviews:

No comments