Cisco ASR-1000-SIP10, Hardware Installation Manual, Page: 41 / 102

3-19
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide
OL-14126-03
Chapter 3 Overview: Cisco ASR 1000 Series Aggregation Services Routers Shared Port Adapters
2-Port Gigabit Ethernet SPA Overview
XFP Port Cabling Specifications
Table 3-15 shows the port cabling specifications for an XFP module.
2-Port Gigabit Ethernet SPA Overview
The following sections describe the 2-Port Gigabit Ethernet SPA:
•
2-Port Gigabit Ethernet SPA LEDs, page 3-19
•
2-Port Gigabit Ethernet SPA Cables, Connectors, and Pinouts, page 3-20
2-Port Gigabit Ethernet SPA LEDs
The 2-Port Gigabit Ethernet SPA has two types of LEDs: an A/L LED for each port on the SPA, and one
STATUS LED, as shown in
Figure 3-17 .
Figure 3-17 2-Port Gigabit Ethernet SPA Faceplate
Table 3-16 describes the 2-Port Gigabit Ethernet SPA LEDs.
RX overload 10GLR SR-1: 0.5 dBm
10GER IR-2: –1.0 dBm
10GZR LR-2: –7.0 dBm
Maximum receiver power damage 10GLR SR-1: 5 dBm
10GER IR-2: 5 dBm
10GZR LR-2: 5 dBm
Table 3-14 XFP Module Specifications for the 1-Port 10-Gigabit Ethernet SPA (continued)
Specification Description
Table 3-15 XFP Port Cabling Specifications
XFP Module Wavelength Fiber Type
XFP-10GLR-OC192SR 1310 nm SMF
XFP-10GER-OC192IR 1550 nm SMF
XFP-10GZR-OC192LR 1550 nm SMF
ST
ATUS
0 1
0 1
A/L A/L A/L A/L
SPA-2X1GE-V2
211969
2
1
1
A/L (Active/Link) LED
2
STATUS LED