manualshive.com logo in svg

Cisco ASA 5512-X, Configuration Manual

The Cisco ASA 5512-X user manual provides comprehensive Installation Instructions, empowering users to easily set up and configure their network security device. This invaluable manual can be conveniently downloaded for free from our website manualshive.com, ensuring users have access to the necessary resources for seamless installation and optimal functionality.

Share
Download
background image

 

17-5

Cisco ASA Series Firewall CLI Configuration Guide

 

Chapter 17      ASA CX Module

  The ASA CX Module

configuration of the ASA CX IP address within the ASA CX operating system (using the CLI 
or ASDM). However, physical characteristics (such as enabling the interface) are configured on 
the ASA. You can remove the ASA interface configuration (specifically the interface name) to 
dedicate this interface as an ASA CX-only interface. This interface is management-only.

Policy Configuration and Management

After you perform initial configuration, configure the ASA CX policy using Cisco Prime Security 
Manager (PRSM). PRSM is both the name of the ASA CX configuration interface and the name of a 
separate product for configuring ASA CX devices, Cisco Prime Security Manager. 

Then configure the ASA policy for sending traffic to the ASA CX module using ASDM, the ASA CLI, 
or PRSM in multiple-device mode.

Authentication Proxy for Active Authentication

You can configure identity policies on the ASA CX to collect user identity information for use in access 
policies. The system can collect user identity either actively (by prompting for username and password 
credentials) or passively (by retrieving information collected by AD Agent or Cisco Context Directory 
Agent, CDA).

If you want to use active authentication, you must configure the ASA to act as an authentication proxy. 
The ASA CX module redirects authentication requests to the ASA interface IP address/proxy port. The 
default port is 885, but you can configure a different port. 

To enable active authentication, you enable the authentication proxy as part of the service policy that 
redirects traffic to ASA CX, as explained in 

Create the ASA CX Service Policy, page 17-17

.

Compatibility with ASA Features

The ASA includes many advanced application inspection features, including HTTP inspection. 
However, the ASA CX module provides more advanced HTTP inspection than the ASA provides, as well 
as additional features for other applications, including monitoring and controlling application usage.

To take full advantage of the ASA CX module features, see the following guidelines for traffic that you 
send to the ASA CX module:

•

Do not configure ASA inspection on HTTP traffic.

•

Do not configure Cloud Web Security (ScanSafe) inspection. If you configure both the ASA CX 
action and Cloud Web Security inspection for the same traffic, the ASA only performs the ASA CX 
action.

•

Other application inspections on the ASA are compatible with the ASA CX module, including the 
default inspections.

•

Do not enable the Mobile User Security (MUS) server; it is not compatible with the ASA CX 
module.

•

Do not enable ASA clustering; it is not compatible with the ASA CX module.

Summary of Contents for ASA 5512-X







































































































































































































































































































































































































































Reviews:

No comments

Related manuals for ASA 5512-X

Supermicro Supero SC842i-500B User Manual preview
Supero SC842i-500B
Brand: Supermicro Pages: 60
EVOC IPC-6805E Manual preview
IPC-6805E
Brand: EVOC Pages: 39
Lumens OIP-AC01 Quick Installation Manual preview
OIP-AC01
Brand: Lumens Pages: 2
Barco NGC-105 User Manual preview
NGC-105
Brand: Barco Pages: 39
Patton electronics ForeFront 6276 User Manual preview
ForeFront 6276
Brand: Patton electronics Pages: 51

Brands by name

Popular brands

Load more brands