manualshive.com logo in svg

Cisco ASA 5512-X, Configuration Manual, Page: 284 / 422

Share
Download
Cisco ASA 5512-X Configuration Manual Download Page 284

 

12-10

Cisco ASA Series Firewall CLI Configuration Guide

 

Chapter 12      Quality of Service

  Monitor QoS

conformed 198785 bps, exceed 2303 bps

QoS Priority Statistics

To view statistics for service policies implementing the 

priority

 command, use the 

show service-policy 

priority 

command.

hostname# 

show service-policy priority

Global policy:

Service-policy: global_fw_policy

Interface outside:

Service-policy: qos

Class-map: TG1-voice

Priority:

Interface outside: aggregate drop 0, aggregate transmit 9383

“Aggregate drop” denotes the aggregated drop in this interface; “aggregate transmit” denotes the 
aggregated number of transmitted packets in this interface.

QoS Priority Queue Statistics

To display the priority-queue statistics for an interface, use the 

show priority-queue

 

statistics

 

command. The results show the statistics for both the best-effort (BE) queue and the low-latency queue 
(LLQ). The following example shows the use of the 

show priority-queue statistics

 command for the 

interface named test.

hostname# 

show priority-queue statistics test

Priority-Queue Statistics interface test

Queue Type        = BE

Packets Dropped   = 0

Packets Transmit  = 0

Packets Enqueued  = 0

Current Q Length  = 0

Max Q Length      = 0

Queue Type        = LLQ

Packets Dropped   = 0

Packets Transmit  = 0

Packets Enqueued  = 0

Current Q Length  = 0

Max Q Length      = 0

hostname#

In this statistical report:

•

“Packets Dropped” denotes the overall number of packets that have been dropped in this queue. 

•

“Packets Transmit” denotes the overall number of packets that have been transmitted in this queue.

•

“Packets Enqueued” denotes the overall number of packets that have been queued in this queue.

•

“Current Q Length” denotes the current depth of this queue.

•

“Max Q Length” denotes the maximum depth that ever occurred in this queue.

Summary of Contents for ASA 5512-X







































































































































































































































































































































































































































Reviews:

No comments