manualshive.com logo in svg

Cisco ASA 5512-X, Configuration Manual, Page: 129 / 422

Share
Download
Cisco ASA 5512-X Configuration Manual Download Page 129

C H A P T E R

 

6-1

Cisco ASA Series Firewall CLI Configuration Guide

 

6

Getting Started with Application Layer Protocol 
Inspection

The following topics describe how to configure application layer protocol inspection. 

•

Application Layer Protocol Inspection, page 6-1

•

Guidelines for Application Inspection, page 6-5

•

Defaults for Application Inspection, page 6-6

•

Configure Application Layer Protocol Inspection, page 6-9

•

Configure Regular Expressions, page 6-15

•

History for Application Inspection, page 6-18

Application Layer Protocol Inspection

Inspection engines are required for services that embed IP addressing information in the user data packet 
or that open secondary channels on dynamically assigned ports. These protocols require the ASA to do 
a deep packet inspection instead of passing the packet through the fast path (see the general operations 
configuration guide for more information about the fast path). As a result, inspection engines can affect 
overall throughput. Several common inspection engines are enabled on the ASA by default, but you 
might need to enable others depending on your network. 

The following topics explain application inspection in more detail.

•

How Inspection Engines Work, page 6-1

•

When to Use Application Protocol Inspection, page 6-2

•

Inspection Policy Maps, page 6-3

How Inspection Engines Work

As illustrated in the following figure, the ASA uses three databases for its basic operation:

•

ACLs—Used for authentication and authorization of connections based on specific networks, hosts, 
and services (TCP/UDP port numbers).

•

Inspections—Contains a static, predefined set of application-level inspection functions.

Summary of Contents for ASA 5512-X







































































































































































































































































































































































































































Reviews:

No comments