manualshive.com logo in svg

Cisco ASA 5512-X, Configuration Manual, Page: 12 / 422

Share
Download
Cisco ASA 5512-X Configuration Manual Download Page 12

 

1-6

Cisco ASA Series Firewall CLI Configuration Guide

 

Chapter 1      Service Policy Using the Modular Policy Framework

  About Service Policies

Examples of Packet Matching 

For example:

•

If a packet matches a class map for connection limits, and also matches a class map for an 
application inspection, then both actions are applied.

•

If a packet matches a class map for HTTP inspection, but also matches another class map that 
includes HTTP inspection, then the second class map actions are not applied.

•

If a packet matches a class map for HTTP inspection, but also matches another class map that 
includes FTP inspection, then the second class map actions are not applied because HTTP and FTP 
inspections cannot be combined.

•

If a packet matches a class map for HTTP inspection, but also matches another class map that 
includes IPv6 inspection, then both actions are applied because the IPv6 inspection can be combined 
with any other type of inspection.

Order in Which Multiple Feature Actions are Applied

The order in which different types of actions in a policy map are performed is independent of the order 
in which the actions appear in the policy map.

Actions are performed in the following order:

1.

QoS input policing

2.

TCP normalization, TCP and UDP connection limits and timeouts, TCP sequence number 
randomization, and TCP state bypass.

Note

When a the ASA performs a proxy service (such as AAA or CSC) or it modifies the TCP 
payload (such as FTP inspection), the TCP normalizer acts in dual mode, where it is applied 
before and after the proxy or payload modifying service.

3.

ASA CSC

4.

Application inspections that can be combined with other inspections:

a.

IPv6

b.

IP options

c.

WAAS

5.

Application inspections that cannot be combined with other inspections. See 

Incompatibility of 

Certain Feature Actions, page 1-7

 for more information.

6.

ASA IPS

7.

ASA CX

8.

ASA FirePOWER (ASA SFR)

9.

QoS output policing

10.

QoS standard priority queue

Note

NetFlow Secure Event Logging filtering and User statistics for Identity Firewall are order-independent.

Summary of Contents for ASA 5512-X







































































































































































































































































































































































































































Reviews:

No comments