2-19
Firepower 8000 Series Hardware Installation Guide
Chapter 2 Hardware Specifications
Firepower 8000 Series Devices
Use the following table to understand the optical parameters of the fiber interfaces.
Quad-Port 10GBASE (MMSR or SMLR) Fiber Non-Bypass NetMod
The quad-port 10GBASE (MMSR or SMLR) fiber non-bypass NetMod contains four fiber ports, and
link and activity LEDs.
Caution
The quad-port 10GBASE non-bypass NetMod contains non-removable SFPs. Any attempt to remove the
SFP may damage the module.
Use the following table to understand the link and activity LEDs on fiber interfaces.
Table 2-23
Non-Bypass Fiber Link/Activity LEDs
Status
Description
Top
(Activity)
For an inline or passive interface: the light flashes when the interface
has activity. If dark, there is no activity.
Bottom
(Link)
For an inline interface: the light is on when the interface has link. If
dark, there is no link.
For a passive interface: the light is always on.
Table 2-24
1000BASE-SX NetMod Optical Parameters
Parameter 1000BASE-SX
Optical connectors
LC duplex
Bit rate
1000Mbps
Baud rate/encoding/tolerance
1250Mbps
8b/10b encoding
Optical interface
Multimode
Operating distances
656 ft (200 m) for 62.5 µm/125 µm fiber
1640 ft (500 m) for 50 µm/125 µm fiber
Transmitter wavelength
770-860 nm (850 nm typical)
Maximum average launch power
0 dBm
Minimum average launch power
-9.5 dBm
Maximum average power at receiver
0 dBm
Receiver sensitivity
-17 dBm