Quality of Service
QoS Advanced Mode
Cisco 350, 350X and 550X Series Managed Switches, Firmware Release 2.4, ver 0.4
439
23
STEP 4
Click
Apply
. The Running Configuration file is updated.
Policy Table
The Policy Table Map page displays the list of advanced QoS polices defined in the system.
The page also allows you to create and delete polices. Only those policies that are bound to an
interface are active (see Policy Binding page).
Each policy consists of:
•
One or more class maps of ACLs which define the traffic flows in the policy.
•
One or more aggregates that applies the QoS to the traffic flows in the policy.
After a policy has been added, class maps can be added by using the Policy Table page.
To add a QoS policy:
STEP 1
Click
Quality of Service
>
QoS Advanced Mode
>
Policy Table
.
This page displays the list of defined policies.
STEP 2
Click
Policy Class Map Table
to display the Policy Class Maps page.
-or
Click
Add
to open the Add Policy Table page.
STEP 3
Enter the name of the new policy in the
New Policy Name
field.
STEP 4
Click
Apply
. The QoS policy profile is added, and the Running Configuration file is updated.
Policy Class Maps
One or more class maps can be added to a policy. A class map defines the type of packets that
are considered to belong to the same traffic flow.
To add a class map to a policy:
STEP 1
Click
Quality of Service
>
QoS Advanced Mode
>
Policy Class Maps
.
STEP 2
Select a policy in the Filter, and click
Go
. All class maps in that policy are displayed.
STEP 3
To add a new class map, click
Add
.
