Cisco 8941 User Manual Download Page 22

Page: 22 / 120

To turn on the phone display, press any button or pick up the handset.

Adjust Handset Rest

If your phone is wall-mounted, you may need to adjust the handset rest to ensure that the receiver does not
slip out of the cradle.

Procedure

Step 1

Remove the handset from the cradle and pull the plastic tab from the handset rest.

Step 2

Rotate the tab 180 degrees.

Step 3

Hold the tab between two fingers, with the corner notches facing you.

Step 4

Line up the tab with the slot in the cradle and press the tab evenly into the slot. An extension protrudes from
the top of the rotated tab.

Step 5

Return the handset to the handset rest.

Cisco Unified IP Phones 8941 and 8945 User Guide for Cisco Unified Communications Manager 9.0 (SCCP and

SIP)

Your Phone

Adjust Handset Rest

Summary of Contents for 8941

























































































































Search results

Summary of Contents for 8941

Reviews:

Related manuals for 8941

Brands by name

Popular brands

Cisco 8941, User Manual

Search results

Summary of Contents for 8941

Reviews:

Related manuals for 8941

Brands by name

Popular brands